ClearOne BMA 360 Microphone System - Shop Now and Save!

By: ClearOne

Model: 910-3200-208-U

Sku: 4W0ZVMSXO7

Availability: Out of stock New

Availability: Out of stock

  • BEAMFORMING FEATURES: True Frequency Invariant Beamformer: Gain response is unvarying across frequency, Beamwidths: 35o , 45o and 55o with Frequency Invariance, Beamforming Range: 100 Hz to 20 KHz, Deep Sidelobes: Down to 45 dB of depth, Beam Pointing Accuracy: 0.2 dB, Dynamic Range: 20 Hz to 20 KHz, > 70 dB, Number of Beams: Up to 12, Room Patterns: Full Circle/Square, Rectangular, Semi-Circle/ Classroom, Custom Beams, Coverage Sizes: Up to 600 square feet/58 square meters, Ceiling Height: Configurable with CONSOLE AI from 7 ft to 20 ft
  • AMPLIFIER OUTPUT: Type: 5.08 mm Header, Phoenix-type Euroblock, Audio: 4 channels, Output Power: 4x15 W Max, 8 Ω load, or 2x30W, 4 Ω load, Bridged, Frequency Response: 20 Hz – 22 kHz, +/- 0.5 dB
  • CONFIGURATION: Acoustic Echo Cancellation (AEC) On/Off, Noise Cancellation (NC) on/off. Range: 6 to 25 dB depth., Automatic Level Control (ALC) On/Off, Gain Adjust, Mute On/Off
  • SOFTWARE: CONSOLE AI
  • MOUNTING: Ceiling Mount: 24 in, 600 & 625 mm drop-ceiling grid, VESA© Mount ready: 100 mm hole pattern, M 4 x 10 mm
  • P-LINK PERIPHERAL BUS PORT: Ports Type: RJ-45, P-Link In and Out: Proprietary peripheral bus, P-Link Power: N56 V 36 W IEEE 802.3 at compliant devices or equivalent, Mode B, Cable: Solid core 23 AWG, factory terminated Cat 6, Distance: Normal distance mode: Up to 200 ft (60 m)
  • PoE ++ PORT: Port Type: RJ-45 PoE power, Power on all pairs, 56 V 90 W IEEE 802.3 bt compliant devices or equivalent, Mode A and B, Midspan, Cable: Solid core, 23 AWG, factory terminated Cat6
  • PoE REQUIREMENTS: No speakers: 36 W PoE, connected via P-Link or PoE++, Speakers: Requires 56 V 90 W IEEE 802.3 bt PoE, must be via direct PoE++ port on the BMA 360
  • POWER SELECTION: Automatically senses and switches to whichever input port has PoE power
  • POWER AND THERMAL: Power Source: PoE injector or equivalent, Power Consumption: 100-240 VAC, 50/60 Hz, 23 Watt typical without speaker amp, 55 W at 1/3 power x 4 @ 1 kHz, Thermal: 270 BTU/hr at max power, Operating Temperature: 14 °F/-10 °C to 104 °F/40 °C ambient temperature
Stock Request Notify When Available
  • Add to Wishlist
  • Add to Compare

The industry's only ultra wideband, frequency invariant beamforming microphone array ceiling tile with uniform gain response across all frequency bands.

FiBea technology gives users the ultimate in natural and full fidelity audio across all beams and within a single beam. Deep Sidelobe Beamforming, DsBea, provides unparalleled sidelobe depth, below -40 dB, resulting in superior rejection of reverb and noise in difficult spaces for unrivaled superb audio clarity and intelligibility.

The industry’s only ultra wideband, frequency invariant beamforming mic array with uniform gain response across all frequency bands. With 6G Acoustic Echo Cancellation (AEC) and FiBeam technology, conference participants experience natural and full-fidelity audio across all beams and within a single beam.

The BMA 360 Voice Lift feature provides a powerful and simple way to drive multiple mixminus speaker zones allowing everyone in the local room to hear every word.

Due to the exceptional performance of the breakthrough technologies, FiBea and DsBea, greater Voice Lift gains can be realized that have not been previously possible.

Further advancements in adaptive steering (think of it as smart switching) provide impeccable coverage of each conference participant as well as simultaneous support for camera tracking and Voice Lift.

Built-in, robust power amplifiers, configurable as 4 x 15 Watt or 2 x 30 Watt, provide flexibility for driving loudspeakers.

Integrated features significantly reduce system design complexity, simplify installation, consume less rack space, and lower system cost.

Single workflow for configuration using CONSOLE AI software. Competing products require practitioners to program multiple components using different toolsets: Ethernet switches, Ceiling Tiles, DSP mixers, and the Dante Controller.

Deep Sidelobe Beamforming, DsBea, provides unparalleled sidelobe depth, below -40 dB, resulting in superior rejection of reverb and noise, even in difficult spaces, for superb clarity and intelligibility

A dramatically new approach to precision beamforming provides a new beam topology to easily achieve distortion-free, full 360-degree coverage of any room shape and any seating arrangement using ClearOne Audio Intelligence.

Voice Lift provides a powerful and simple way to drive multiple mix-minus speaker zones allowing everyone in the room to hear every word.

The combination of ClearOne’s beamforming and feedback cancellation technologies provide up to a 20 dB boost in gain before feedback compared to an omni mic.

6G Acoustic Echo Cancellation (AEC) delivers unparalleled per-beam full-duplex audio performance. On-board audio algorithms, like noise reduction, filtering, and Automatic Level Control, eliminate the need for per-beam processing in a DSP mixer - requiring fewer DSP mixer resources.

ClearOne’s breakthrough technologies, FiBeam, DsBeam, Voice Lift, and 6G AEC combine to create VividVoice, a significant advancement for professional conferencing.

Daisy-chain up to three ceiling tiles via P-Link for divisible rooms or larger conference setups – for simpler wiring and longer distances compared to networked “home run” connections via Ethernet.

Supports three different ceiling grid types: 24 in, 600 mm, and 625 mm. It incorporates a VESA-mount hole pattern that supports pole mounting. Hard-ceiling mount adapter kits are also available.

In the Box

  • ClearOne BMA 360 Microphone System